devolo MicroLink 56k Fun LAN Konfiguration 1.1.0.0

To configure the devolo MicroLink 56k Fun LAN, you need to access its configuration interface through a web browser. Open your preferred browser and enter the device's IP address in the address bar. You will then be prompted to enter your login credentials, which are usually 'admin' for both the username and password. Once logged in, you can modify various settings and configure the device according to your needs.

The default IP address of the devolo MicroLink 56k Fun LAN is usually '192.168.0.1'. You can enter this IP address in your web browser's address bar to access the device's configuration interface.

To change the IP address of the devolo MicroLink 56k Fun LAN, you need to access its configuration interface through a web browser. Once logged in, navigate to the 'Network' or 'LAN' settings section and look for an option to modify the IP address. Enter the new desired IP address and save the changes. Please note that you may need to reconnect to the device using its new IP address after applying this setting.

The devolo MicroLink 56k Fun LAN supports both wired Ethernet connections via its LAN port, and dial-up modem connections through its integrated 56k modem. This allows you to connect devices directly via Ethernet or use the modem to establish a connection to the internet through a telephone line.

Yes, the devolo MicroLink 56k Fun LAN can be used as a standalone modem without connecting it to a computer. You can connect the modem directly to a telephone line and use it to establish a dial-up internet connection. However, keep in mind that configuring and managing the device's settings usually require accessing its configuration interface via a web browser on a computer.

No, the devolo MicroLink 56k Fun LAN does not support wireless connections. It only has a LAN port for wired Ethernet connections and an integrated 56k dial-up modem for internet connectivity.

To use the devolo MicroLink 56k Fun LAN, you need a computer or device with an Ethernet port or a dial-up modem port. Additionally, you may need an active telephone line for dial-up internet connections if you plan to use the device's integrated modem. For accessing the configuration interface and managing settings, you will require a web browser on your computer.

Yes, you can connect multiple devices to the devolo MicroLink 56k Fun LAN using a wired Ethernet connection. Simply connect a network switch or hub to the device's LAN port, and then connect your additional devices to the switch or hub. This allows you to share the internet connection provided by the devolo MicroLink 56k Fun LAN among multiple devices.

To reset the devolo MicroLink 56k Fun LAN to its factory default settings, locate the reset button on the device. Press and hold the reset button for approximately 10 seconds until the device's LEDs start flashing. Release the button, and the device will reboot, restoring it to its default configuration. Please note that this will erase any custom settings you have made, so make sure to backup your configuration before performing a reset.

For further support or documentation regarding the devolo MicroLink 56k Fun LAN, you can visit the devolo AG website. They provide product information, manuals, troubleshooting guides, and other resources that can assist you in configuring and using the device.